Some of the customers get an aroma diffuser and start to use, but they do not read the maunal before using.
This page will show you how to use an aroma diffuser.
Just take our classical model as an example.
1. Please put the product upside, and remove the upper cover. Fig 1
2.Please connect the AC adaptor to the base of DC jack of the main body via cable guide. Fig 2
3.Please use the measure cup to supply water from the water pipe. Fig 3
Please take care, do not pour water out of the cup and fill water into the water tank with measuring cup.
Pay attention to the filled water level; do not exceed the max line on the water tank.
Water with high temperature and the mist may fly out, please never fill in water during operating.
4.Drop essential oil into water tank vertically. The dosage is about 2-3 drops (about 0.1-0.15ML) per 100ML water. Fig 3
5.Install the cover of the main body with the original channel.
BTW: You must cover the upper cover when you want to use the product.
6.Please connect the AC adaptor with family user power supply socket.
7.If you press the MIST switch on main body of the product, mist function is on.
You can set up the timer, each time you press down this button; the timer will be changed between 60 minutes, 120 minutes, 180 minutes, ON and OFF. Fig 4
•When the power supply is connected, the original state is OFF.
•If there is few water in the water tank, the power supply will turn off immediately even with power connected.
•If the timing mode is off, LED light will be off at the same Time.
8.Press HIGH/LOW” to adjust the spray intensity. (Strong or Weak) Fig5
9.If you press the LIGHT on, you can choose ON/OFF state of the LED light. If you press this button for each time, the light color and lightness will be changed. Fig6
10.If you do not use it for a long time, please drain out the water from tank water, dry and then keep it well.
If you want to user it again, please use the neutral detergent to clean the water tank again, then you can use it.
Post time: Jul-27-2022