What to do if the aromatherapy machine does not smoke?

The aromatherapy machine can play the role of humidifying the air and refreshing the indoor air.

With the scent it can play different roles, such as soothing, help sleeping and so on. The aromatherapy machine needs to be plugged in, and then it will spew out fine mist from the nozzle.  If there is not mist, or the mist is small, you have to check these problems. 

1.The aromatherapy machine is blocked. You can use a small brush dipped in 60 degrees of warm water to brush and clean. Or use vinegar with a little salt to effectively dissolve water and alkali. Then the mist will slowly spew out. Be careful not to use strong acids, which are not conducive to maintenance and may damage the machine.

2. The atomizer is broken. The atomizer in the aromatherapy machine needs to withstand 3 million times / s of high-frequency vibration for a long time, and the inferior atomizer is easy to break, resulting in the inability of the whole machine to run.

Then you should open the bottom cover to check if the fuse is burned out. If the fuse is still good, try adjusting the potentiometer on the board, turning a quarter of a turn clockwise to try again. If it still doesn’t work, then you have to get a new atomizer.

3. Too long time without using the oscillator. If the aromatherapy machine works but does not spray water mist, the fan fails. You can gently apply a little lubricating oil on the oscillator.  What is the reason when comes with small mist？1, if the tap water is used for a long time, it is easy to cause the oscillating film to form a water alkali, which cannot work normally, and the water mist naturally disappears. At this time, lemon can be used to remove scale. Lemons contain a large amount of citrate, which can inhibit the crystallization of calcium salt.

After these you still can’t make the mist normal, you need to find the after-sale service people to fix it. Or just buy a new one since it’s cheap stuff and consumables.